PY000A000AY – LTS 70 Amp 50Hz Load Transfer Switch. Generac Transfer Switches are designed for use with single-phase 50Hz generators. The transfer switches are certified for IEC 60947-6-1 (the transfer switch standard) where electronically operated and mechanically interlocked contacts are required for safety.
PY000A000AY
PY000A000AY – LTS 70 Amp 230 1Ø NEMA 3R 50Hz CE Load Transfer Switch
Generac Transfer Switches are designed for use with single-phase 50Hz generators. The transfer switches are certified for IEC 60947-6-1 (the transfer switch standard) where electronically operated and mechanically interlocked contacts are required for safety.
Generac Transfer Switches are available with steel enclosures for 45 and 70 amp single phase models. The enclosure is RAL 7035 painted and certified to IEC IP66. The controller at the generator senses and controls the timing, exercising and transfer commands. All Generac models are designed with a cutting edge system that maximizes power and efficiency.
The PowerGen team is here to make sure you find the perfect power source for your business needs. With years of experience and expertise, we can provide expert advice about sales, installation and maintenance so that all fields are covered in-depth with ease!
The PY000A000AY 70 Amp transfer switch is perfect to use with your 1ph Air Cooled Standby Gas Generator.
Model function specifications – PY000A000AY Transfer Switch
Utility voltage dropout: <60%
Timer to generator start: 10 seconds (factory set, but adjustable*)
Engine warm-up delay: 5 seconds
Standby voltage sensor: 60% for 5 seconds
Mainline circuit breaker: 32 Amp
Utility voltage pickup: >80%
Re-transfer time delay: 15 seconds
Engine cool-down timer: 60 seconds
Exerciser: 12 mins / every 7 days
For adjustable transfer switch start timer options, check out the Generac specifications manual attached. This transfer switch can be operated manually without power applied.
*Specifications are taken from the PY000A000AY catalogue (attached).
Specifications for the PY000A000AY
Amps: 70
Voltage: 230V, 1Ph+N, 50Hz
Load transmission type (automatic): open transmission
Enclosure type: IP66
Maximum breaking capacity (pf. 0.45): 950A@440V / 600A@690V
Terminal size (power section): 10 + 10 mm2 (Ph + N)
Terminal size (control section): 1.5mm2
For measurement specifications, please refer to the Generac specifications manual attached.
*Specifications are taken from the PY000A000AY catalogue (attached).
Specifications for the PY000A000AY
Rated current (AC-1) (690V): 70A@40°C / 60A@60°C / 50A@70°C
Voltage: 230 V, 1Ph+N, 50Hz
Transmission: open
Transmission: open
Enclosure type: IP66
Terminal size (power section): 35mm2 (Ph + N)
Terminal size (control section): 1.5mm2
Admissable terminal connectors (power and control section): end sleeves
*Specifications are taken from the PY000A000B8 catalogue (attached).
For measurement specifications, please refer to the Generac specifications manual attached.
PY000A000AY includes:
- Single throw contractors, certified to the transfer switch standard IEC 60947-6-1 with electrically operated, mechenically interlocking contacts for fast, positive connections.
- High-endurance, interlocked contactor, suitable for both inductive and resistive loads.
- Less than 160 millisecond transfer time.
- Dual coil design.
- Contactors built-in surge protection.
- Limited 5 year warranty.
Our team at PowerGen provide you with the power to generate solutions for businesses. Call us today on 1300 885 789 to discuss this option for your business.