SY000A00117-GG

SY000A00117-GG – LTS 100 Amp 400 3Ø 4P Suit Gas 20 Kva Generac Transfer Switches are designed for use with three-phase 50Hz generators. The transfer switches are certified for IEC 60947-6-1 (the transfer switch standard) where electronically operated and mechanically interlocked contacts are required for safety.

Note: The PowerGen After Sales Team will modify the SY000A00117-GG for specific requests.

For the three-phase switch, the load is transferred to the generator when any phase fails, when the phase sequence is incorrect or when there is over/under voltage (± 10%).

Generac Transfer Switches are available with steel enclosures for 45 and 70 amp single phase models. The enclosure is RAL 7035 painted and certified to IEC IP66. The controller at the generator senses and controls the timing, exercising and transfer commands. All Generac models are designed with a cutting edge system that maximizes power and efficiency.

The PowerGen team is here to make sure you find the perfect power source for your business or home needs. With years of experience and expertise, we can provide expert advice about sales, installation and maintenance so that all fields are covered in-depth with ease!

The SY000A00117-GG – LTS 100 Amp 400 3Ø 4P Suit Gas 20 Kva Generac Transfer Switch is perfect to use with your Generac Gas Generator.

Model function specifications – SY000A00117-GG Transfer Switch

Rated current (AC-1) (690V): 45A@40°C / 40A@60°C / 32A@70°C
Voltage: 400 V, 3Ph+N, 50Hz
Standby voltage sensor: 60% for 5 seconds
Transmission: open
Enclosure type: IP66
Rated current (AC-1) (690V): 45A@40°C / 40A@60°C / 32A@70°C
Voltage: 400 V, 3Ph+N, 50Hz
Standby voltage sensor: 60% for 5 seconds
Transmission: open
Enclosure type: IP66
Terminal size (power section): 10mm2 (Ph + N) 
Terminal size (control section): 1.5mm2 
Admissable terminal connectors (power and control section): end sleeves

*Specifications are taken from the PY000A000B8 catalogue (attached).

For measurement specifications, please refer to the Generac specifications manual attached.

Note: The PowerGen After Sales Team will modify the SY000A00117-GG for specific requests.

SY000A00117-GG includes:

• Single throw contractors, certified to the transfer switch standard IEC 60947-6-1 with electrically operated, mechenically interlocking contacts for fast, positive connections.
• High-endurance, interlocked contactor, suitable for both inductive and resistive loads.
• Less than 160 millisecond transfer time.
• Dual coil design.
• Contactors built-in surge protection.
• Limited 5 year warranty.

Our team at PowerGen provide you with the power to generate solutions for businesses. Call us today on 1300 885 789 to discuss this option for your business.